Electrical Room Sign

Clearly identify restricted electrical areas with this Electrical Room sign, designed to meet OSHA and NYC safety requirements. Essential for commercial and residential buildings, this sign helps prevent unauthorized access, improves hazard awareness, and supports code-compliant labeling of electrical equipment rooms. 

Dimensions: 4" x 9.875"

Materials: Printed Vinyl Mounted on to .03125in Aluminum

What This Sign is For: The Electrical Room sign is used to clearly label areas that contain electrical panels, switchgear, or other high-voltage equipment. It helps prevent unauthorized access, alerts occupants to potential hazards, and ensures emergency responders can quickly identify critical infrastructure. 

Legal Requirement Explained: Electrical room signage is required under OSHA regulations (29 CFR 1910 Subpart S) and is supported by the National Electrical Code (NEC §110.22) and NYC Building Code provisions for proper identification of electrical equipment and hazardous areas.
Clear labeling ensures that only authorized personnel access these rooms and that emergency responders can quickly locate electrical systems during an incident, reducing risk of injury, fire, or system failure.

Who is Required to Post This Sign: 
- Commercial buildings
- Industrial facilities
- Multifamily residential buildings with electrical service rooms
- Construction sites with designated electrical areas
- Any property containing a dedicated electrical room, panel room, or switchgear area

Where We Recommend This Sign Be Posted: 
- On the door leading into the electrical room
- Immediately adjacent to the entrance
- At all access points where electrical equipment is housed
- In a location that is clearly visible before entering the space

Unacceptable Locations to Post This Sign: 
- Inside the room where it is not visible prior to entry
- Behind doors, equipment, or obstructions
- On removable surfaces that may shift or be relocated
- In low-light or concealed areas that reduce visibility
- In locations that could be confused with other room designations

Recommended Height / Installation Requirements: 
- Install at eye level (typically 48”–60” above finished floor)
- Must be permanently mounted using durable materials
- Ensure high contrast and legibility for quick identification
- Should be visible under normal and emergency lighting conditions
- Use weather-resistant materials if installed in exposed environments

Disclaimer: Signage requirements may vary based on building type, occupancy classification, and specific local code interpretations. Always consult applicable NYC Building Code, OSHA regulations, and a licensed professional or authority having jurisdiction (AHJ) to confirm compliance for your specific project.